Air Line and Air Cleaning Equipment
Complete SMC FRL units as well as separate Filtration, Regulation and Lubrication units are available. Optional Auto-drain feature can be added to the FRL units. In addition depending on industry requirement other components such as micro mist separators can be added in the flow line.

	Features	Sizes
Complete FRL units	Filtration: 5 microns, Regulation: 0.5 to 8.5 Kgf/cm	From ¼” to 1”
Air Regulators	Regulation: 0.5 to 8.5 Kgf/cm	From ¼” to 2”
Air Filters	Filtration: 5 microns (optional auto-drain)	From ¼” to 2”
Air Lubricators	--	From ¼” to 1 ½”
Mist Separators	Filtration: 0.3 microns (optional auto-drain)	From ¼” to 2”
Super Mist Separators	Filtration: 0.01 microns	From ½” to 2”
Micro Mist Separators	Filtration: 0.01 microns (with auto-drain)	From ½” to 2”
Water Separators	With auto drain	1 ½”
Air Dryer	Flow 1500 l/min, for 15 HP compressor	¾”
Main Line Filters	Filtration: 3 microns	From ½” to 1 ½”
Filter-Regulators	Filtration: 5 microns, Regulation: 0.5 to 8.5 Kgf/cm	From ¼” to ¾”
Precision Regulators	Set-able range 0.05 to 7 kgf/cm	¼” and ½”
Pressure Gauges	Range 0 – 150 psi, 0 – 10 Kgf/cm	1/8” and ¼”

Replacement elements are available for all Air Filters, Mist Separators, Super Mist Separators and Micro Mist Separators,

Booster Regulators
The SMC booster-regulator, when connected to an air supply, increases pressure up to two to four times, without the need of an external power supply. The desired pressure can easily be adjusted. With Booster pressure, cylinders with smaller bore sizes can be used if desired. Alternatively, higher power of the actuator can also be achieved. Finally the Booster-Regulator protects downstream equipment from fluctuations.

The Booster regulators available can be Handle/ Manual or Air pilot operated. The maximum O/P pressure is about 9.9 kgf/cm2.

AIR TANKS are recommended for use with Booster Regulators for stable air supply and pressure. SMC tanks with capacities of 5, 10, 20 and 38 liters are available at Jubilee Corporation.

Air Cylinders
The great variety that SMC offers in air cylinders allows the consumer to choose one that is ideal for his/her specific application.

Type of air cylinder	Bore sizes (mm)	Strokes Possible (mm)	Pressure rating
CQ2 series	40, 50, 63	25, 50, 100	0.5 – 9.9Kgf/cm
CA1 and CS1 series’	40, 50, 63, 80, 100, 160	25, 50, 75, 100, 200, 300, 500	0.5 – 9.9Kgf/cm
CM series	25, 32	25, 30, 50, 100, 150, 250	0.5 – 9.9Kgf/cm
CJ1 series	10	30, 60	0.6 – 7 Kgf/cm

Speed Controllers are usually included in systems to allow Air Cylinders to function efficiently. Both SMC Inline type Speed Controllers and Direct mounting type Speed Controllers are available for most bore sizes. Variations in the standard model are also possible.

Air Fittings
By far the most popular type of fittings today in the pneumatics industry, SMC one-touch quick fittings are extremely simple to install and have proven to be leak proof. The fittings are available for most Tube O.D.s. The variety includes Half Union, Elbow Union, Branch Tee, Branch, Straight Connectors, Tee Connectors, Plugs and Reducers.

Air Tubing
Various kinds of SMC Tubing can be found at Jubilee Corporation. The tubing are available in multiple colours such as black, yellow, white, red and blue. The materials used for these tubing are:
- Polyurethane
- Nylon
- Polyethylene (made in Australia)

Tubing is available per meter, or per 20 meter roll.

SMC Product CDs are available on request from Jubilee Corporation.