Directional Control Valves and Flow/Pressure Controls
SMC manufactures an extremely wide variety of valves to suit every industry requirement. The high quality valves and pressure controls are accepted world-wide as the industry standard. SMC Directional Control Valves and Flow/Pressure switches can be divided into 3 main categories:

1. Solenoid Valves:
These are simple 2-PORT solenoid valves. The table below shows the variety and ranges offered by Jubilee Corporation. In the table, under the ‘Diameters available’ category, only the minimum and maximum are given. Most in between diameters are also available

Range	Use	Diameters available	Range Pressure rating
Compact VCW series	General	From ¼” to ½”	0 – 284 psi/ 0 - 20Kgf/cm
Standard series	General Steam use	From ¼” to 2” From ¼” to 2”	0 – 140 psi/ 0 - 10Kgf/cm 4.5 – 140 psi/0.3 - 10Kgf/cm
Compact VX series	General / Compressed Air Heavy Oil Air, Hot Water (etc.) Steam	From ¼” to 1” From ¼” to 1” From ½” to 1” ¼”	0 – 140 psi/ 0 - 10Kgf/cm 0 – 140 psi/ 0 - 10Kgf/cm 3 – 150 psi/ 0.2 - 10Kgf/cm 0 – 300 psi/ 0 - 21Kgf/cm

Spare coils are also available for the standard series valves and the compact VX and VCW series’

2. Directional Control Valves
Optimized for industrial environments, the SMC range of multi-port, directional control valves are ideal for most pneumatic applications. The solenoid controlled directional valves feature:
- Low power consumption (0.6W)
- Compact slim body with large flow rate
- High Speed response: max. 10ms
- Light weight

The table below categorizes the various directional control valves available at Jubilee Corporation.

Range	Ports available	Diameters available	Range Pressure rating
Standard solenoid valves	3, 4 and 5	From M5x0.8 to 1”	0 – 150 psi/ 0 - 10Kgf/cm
Compact “SY” solenoid series	5	¼”	21.3 – 101 psi/0 – 7.1Kgf/cm
Hand valves	4	From ¼” to ½”	--
Limit valves	3 and 5	¼”and 1/8”	--
Relay valve (time delay valve)	3	1/8”	0 – 140 psi/ 0 - 10Kgf/cm
Air Operated valve (compact)	5	M5	0 – 140 psi/ 0 - 10Kgf/cm

Other than these valves, Jubilee Corporation provides SMC:
- Auto drain valves
- Booster relays
- Lock-up valves
- Silencers for noise reduction (from 16dB to 30dB)
- Check valves (cracking pressure: 0.1Kgf/cm)
- Quick Exhaust valves
- Indicators

3. Pressure Switches
SMC ISG pressure switches have a set-able range of 0.5 – 9.9Kgf/cm and an on/off diff. of 0.3 - 6Kgf/cm. The automatic switches are suitable for oil liquid and air. A special model for steam and Ammonia pressure control is also available.